Open 24/7 · Warwick, RI

Faucet Repair in Warwick, RI

A dripping tap wastes water and wears the fixture further each day. Faucet repair in Warwick, RI covers kitchen, bathroom, laundry and outdoor taps, from a worn cartridge to a leaking base.

Emergency? Call now, 24/7(401) 740-0002

Say what the tap is doingDrip, spray, stiff handle or low flow. One sentence is enough.
The faucet type is identifiedCompression, cartridge, ball or ceramic disc. The type decides the fix.
Worn parts swapped or the faucet replacedA rebuild if the body is sound. A new faucet if it is not.

What we help with

Jobs near faucet repair in Warwick, RI

Faucet trouble often sits beside other fixtures and supply problems.

Pipe repair

Leaks in supply pipes under the sink.

Pipe repair details →

Low water pressure

When every tap in the house is weak, not one.

Low water pressure details →

Garbage disposal repair

Kitchen sink trouble that is not the tap.

Garbage disposal repair details →

Shower repair

Valve and cartridge problems at the shower.

Shower repair details →

Start here

What a failing faucet does

Most faucet faults are small parts that wear out. The question is which part.

Drip from the spout when the faucet is offWorn washer, seat, cartridge or O-ring. The commonest faucet fault.Drips and what causes them Water pooling at the base of the handle or spoutA worn O-ring or packing nut leaking up the stem.Leaks at the base Low flow from one faucet onlyMineral buildup in the aerator or a clogged cartridge. Other taps are fine.Low flow Hot and cold mix wrong or the handle is stiffA worn mixing cartridge or valve cartridge.Handle problems Water under the sink cabinetCould be the faucet supply lines, the drain or the faucet body.Check under the sink Spray hose or pull-out head that will not retractWeight, hose kink or a worn spray head.Pull-out faucets A drip in winter from a hose bibbOutdoor spigot split by frost. It shows when the weather warms.Outdoor faucets Whistling or knocking when you turn it onA loose washer or a worn seat or air in the lines.Noises

Why call us

Why call about a faucet

A faucet looks simple until the handle comes off and there are five parts that all look alike.

Open 24/7A tap that will not shut off is an any-hour problem.
Same-day service is availableYou do not live with a leak under the sink for a week.
All fixtures on one numberKitchen, bathroom, laundry and outdoor taps are handled together.
A person answersDescribe the tap and get a straight answer on repair or replace.
No formsTell it out loud, in your own words.

We vs others

Faucet fixes: this call versus the usual route

Six points that matter when a tap leaks.

	UsWarwick Cove Plumbing	vsMany other plumbing companies
Availability	Open 24/7A burst supply line under the sink does not wait.	Weekday hours
Reaching someone	One call, a person answersNo waiting on an email.	A web form
How soon	Same-day service is availableThe leak is not left to run all weekend.	Next free appointment
What jobs they handle	Rebuilds, replacements, supply lines and outdoor spigotsSmall fixtures included.	Bigger jobs only
Local knowledge	Covers Warwick and 43 nearby townsIncludes frost-split outdoor taps after winter.	Generic approach
Price clarity	This page lists what moves the price. Ask about pricing when you call.Type and parts availability lead the list.	Settled on site

Based on what is typical. Individual companies vary.

How it works

From a dripping tap to a dry sink

Four stages. Most faucet jobs are quick when the parts are available.

Shut off under the sink
The two small valves under the sink cut water to this faucet only.
Take it apart
Handle, cap and cartridge come off. The wear is usually obvious.
Replace worn parts or the faucet
A cartridge, seat or O-ring kit, or a new faucet if the body is damaged.
Rebuild and test
Reassemble, turn the water on slowly and check the spout, handle and supply lines.

Pricing

What moves the price of faucet repair

A quick O-ring swap and a faucet replacement are different visits. Here is what decides it.

Faucet type

Cartridge, compression, ball and ceramic disc faucets use different parts.

Parts availability

Common brands have kits. Older or imported designs can be hard to match.

Condition of the faucet body

A pitted or corroded body is better replaced than repaired.

Shut-off valves and supply lines

Stuck valves and cracked lines under the sink are replaced during the visit.

Location

A kitchen sink is easy to reach. A wall-mounted tub spout or an outdoor spigot is different work.

Have this ready for the call

Which faucet: kitchen, bathroom, laundry or outdoor
Single handle or two handles
What it does: drip, spray, stiff or weak flow
Whether the shut-off valves under the sink turn

Ask about pricing when you call.

Call now, 24/7(401) 740-0002

Inside the faucet

Faucet repair in Warwick, RI starts with knowing the type

The same drip has different causes in each faucet design.

Four common designs and what wears in each

Compression faucets have two handles and use a rubber washer that presses on a seat. Cartridge faucets use a plastic or brass cartridge that slides to mix hot and cold. Ball faucets, common on kitchen sinks, use a rotating ball with rubber seats and springs. Ceramic disc faucets use two polished discs that slide against each other.

Faucet repair in Warwick, RI is mostly about identifying which of these is under the handle and which part has worn. Homes with older kitchens and baths often have all four types across different fixtures. Take a photo of the faucet before you call if you can.

Faucet designs

The handle and the movement hint at the design.
Type	How it looks	What wears	Usual fix
Compression	Two handles that turn several times	Rubber washer, seat	New washer; reface or replace the seat
Cartridge	Single handle or two, smooth movement	Cartridge, O-rings	Replace the cartridge
Ball	Single handle over a round cap	Seats, springs, ball	Rebuild kit
Ceramic disc	Single handle, quarter-turn feel	Seals, disc cylinder	Replace the cylinder
Pull-out or pull-down spout	Hose and weight under the sink	Hose, spray head, counterweight	Replace the worn part

Drips and noises

Why a faucet drips and what each sign means

A slow drip adds up, and a hiss or knock has its own cause.

Reading the drip

A drip from the spout when the faucet is off means water is getting past the closing part. In a compression faucet that is a worn washer. In a cartridge or ball faucet, it is a damaged seal or cartridge. Hot water drips sooner because the heat hardens rubber.

A drip from the handle points to an O-ring or packing. A whistle or rattle when the water runs suggests a loose washer or a worn seat vibrating in the flow. A small drip is not harmless: it adds wear to the parts and can leave a rust or mineral line in the sink. Faucet repair in Warwick, RI is far quicker if you call before a drip turns into a steady flow.

Drip clues

Spout drips when offWasher, seat or cartridge seal.
Drip from the handleO-ring or packing nut.
Whistle on openingLoose or worn washer and seat.
Hot side only dripsHeat hardens rubber parts faster.
Drip stops with a firmer turnA worn seat the washer cannot seal against.

Match the sign to the part.

Weak flow

When water barely trickles from one faucet

If other taps are fine, the problem sits at this faucet.

Low flow from one faucet is usually mineral or debris buildup in the aerator or the cartridge. If all the taps in the house are weak, the issue lies elsewhere. See low water pressure and the guide on why is my water pressure low.

Clean the aerator first. It costs nothing but a few minutes.
What you see	Likely cause	Next step
Weak flow, spray is uneven	Clogged aerator	Unscrew, clean or replace the aerator
Weak only on hot	Debris in the hot supply or a partly closed valve	Check the under-sink valve, then the cartridge
Weak after plumbing work nearby	Debris loosened in the lines	Remove the aerator and flush
Weak on one faucet only	Blocked cartridge or stop valve	Rebuild or replace the cartridge
Weak on every tap	Supply or pressure issue	See the pressure page

Under the sink

Leaks that look like faucet leaks but are not

Water in the sink cabinet may come from three places.

Tracing the wet spot

A wet cabinet floor has many suspects: the faucet body, the supply lines, the shut-off valves, the drain trap and, in a kitchen, the dishwasher hose or the disposal. Dry everything with a towel, run the faucet and watch where the first drop forms. Then run the drain and look again.

Faucet repair in Warwick, RI includes swapping cracked braided supply lines and tired shut-off valves under the sink, since those are common leak points that people think of as faucet leaks. If the drain side is the culprit, see garbage disposal repair or clogged drain.

Under-sink leaks

Dry the cabinet and watch.
Where the drip forms	Likely part	Fix
Under the faucet body	Faucet gasket or body	Repair or replace the faucet
At the top of a supply line	Loose or worn coupling nut	Tighten or replace the line
At a shut-off valve stem	Packing or valve wear	Replace the valve
On the trap below the sink	Slip nut or worn washer	Reseat or replace
From a dishwasher or disposal hose	Hose clamp or fitting	See that appliance

Outdoor spigots

Hose bibbs and winter damage

A frost-split spigot often looks fine until spring.

Why an outdoor tap leaks after winter

If a hose stays connected through the first freeze, water trapped in the spigot freezes and splits the pipe behind the valve. It usually does not leak while frozen. When the weather turns warm, water sprays inside the wall or from the spigot stem. In a basement, a damp rim joist near the spigot is a clue.

Shut the indoor valve for the outdoor line in autumn, disconnect hoses and open the outdoor tap to drain it. If you find a leak in spring, close the valve inside and call. A frost-proof sillcock is a better long-term answer in a cold climate. The guide on how to thaw frozen pipes covers the prevention side.

Hose bibb checks

Hose left on in winterThe usual cause of a split.
Drip behind the wallCheck the rim joist inside.
Sprays from the handleStem seal worn.
Spigot loose in the wallFixing screws or pipe gave way.
No indoor shut-offWorth adding for the winter.

Outdoor tap trouble.

Repair or replace

Rebuild the faucet or install a new one

Both are reasonable choices. The tap’s condition decides.

Faucet repair in Warwick, RI keeps the existing faucet when the body is sound and parts are easy to find. Replacement makes sense when the finish is pitted, the body leaks or the faucet is hard to source parts for.

The plumber looks at the faucet and says which is better.
Situation	Direction	Reason
Single worn washer or O-ring	Repair	A small, quick job when the faucet is otherwise fine.
Cartridge worn in a common faucet	Repair	Replacement cartridges are widely available.
Pitted or corroded body	Replace	The leak will return.
Faucet over two decades old and parts are scarce	Replace	Repairing costs time that a new unit would not.
Loose mount and wobbly spout	Repair or replace	Depends on the sink and the nut access.
Wanting a new look or pull-down spray	Replace	An upgrade, not a fault.

Right now

If a faucet will not stop leaking

Four steps to stop the water until the repair.

Close the small valves under the sink
Turn them clockwise. One is for hot, one for cold.
If no valves turn, close the main
See the guide on how to shut off the main water valve.
Dry the area
Wipe the cabinet and the counter so you can watch for new drips.
Call
Say which faucet, what it does and whether the valves close.

Service areas

Where we work

Faucet repair in Warwick, RI is available across the city and the 43 nearby towns on this map, including Cranston, East Greenwich and Narragansett.

Towns within about 25 miles

Schematic map. Rings show distance from Warwick; positions are approximate.

Questions

Faucet repair in Warwick, RI: common questions

How much does faucet repair in Warwick, RI cost?

It depends on the faucet type, parts availability, the condition of the body, any worn shut-off valves or supply lines and where the faucet is. Ask about pricing when you call.

Why do faucet repair prices vary?

An O-ring swap is brief. A corroded body, a hard-to-find cartridge or a wall-mounted fixture takes longer. Ask about pricing when you call.

Is a dripping faucet worth fixing?

Yes. A drip wastes water, wears the parts further and leaves stains. A small repair now is smaller than a replacement later.

Can you come the same day?

Same-day service is available. Tell the person who answers if water is running that cannot be stopped.

Do you answer at night?

Yes. The line is open 24/7.

Should I repair or replace my faucet?

If the faucet is sound and parts are available, repair is simple. If the body is pitted, corroded or very old, replacement is better value in time and reliability.

What is a faucet cartridge?

It is the cylinder inside a single-handle faucet that controls flow and mixes hot and cold. When its seals wear, the faucet drips or the handle feels loose.

Why does my faucet only drip on the hot side?

Hot water softens and wears rubber seals faster. Often the hot cartridge or washer wears first. Both sides may need parts soon.

What do I do if the shut-off valves under the sink are stuck?

Do not force them. A seized valve can snap. Close the main water valve and call. The plumber can replace the valves during the visit.

Can a faucet repair fix low water flow?

Sometimes. Mineral buildup in the aerator or cartridge is a common cause and is cleaned or replaced. If every tap is weak, see low water pressure.

My outdoor faucet leaks inside the wall. What now?

Close the indoor shut-off for that line and call. Water in a wall is damage in progress. After the repair, shut off and drain the outdoor line each autumn.

Can you repair a kitchen pull-down faucet?

Yes. Common faults are worn hoses, a spray head that sticks, a counterweight that slips and cartridge leaks. The plumber checks which applies.

Guides

Guides for taps and water flow

Dripping tap? Call.

Faucet repair in Warwick, RI, open 24/7. Same-day service is available. One call, a person answers.